elgeneral

OSCAM 1892 for QboxHD


This software is in ALPHA state

------------------------------------------------
25 March 2010

This is the first public release of OScam build for QboxHD

RELEASE 1892.3-qboxhd


BAD
- Cannot use QboxHD internal cardreader: there is no information about them
- I've not tested it with multiple feed (watching a channel and recording another)


GOOD
- Works fine as simple client
- OScam webinterface is working (port 8888). Browse http://IP_YOUR_QBOXHD:8888/
For security reason WebIf access is restricted from "private" IP (192.x.x.x, 10.x.x.x, 172.x.x.x)
See /var/oscam/conf/oscam.conf
- Integrated with SoftCam Panel 2.0.0
SOFTCAM PANEL 2.0.0 MUST BE INSTALLED before you install Oscam


WHERE IS ?
All oscam files are in QboxHD /var/oscam directory

- file oscam.sh4 : executable (run it with start_oscam shell script)
- file start_oscam : shell script to run OScam (you can change debug level editing it and change "DEBUG" var)
- file stop_all_cams : shell script to stop every active/running softcam
- dir conf/ : configuration files
- dir log/ : oscam logs
- dir docs/ : oscam documentation and examples


HOW TO RUN ?
Install as standard qboxhd_update
Edit /var/oscam/conf/oscam.server and set your remote servers (CCC or Newcamd or else .....)
Then run it using Softcam Panel

Los 4 vu+

elgeneral

31.03.2010

qboxhd_update-oscam-1919.0
Zitat:
31 March 2010

RELEASE 1919.0-qboxhd


BAD
- Cannot use QboxHD internal cardreader: there is no information about them


GOOD
- Works fine as simple client
- OScam webinterface is working ( Port 888 . Browse http://IP_YOUR_QBOXHD:8888/
For security reason WebIf access is restricted from "private" IP (192.x.x.x, 10.x.x.x, 172.x.x.x)
See /var/oscam/conf/oscam.conf
- Integrated with SoftCam Panel 2.0.0
SOFTCAM PANEL 2.0.0 MUST BE ALREADY PRESENT if you want use it
- Looks to work whit multiple feed (watching a channel and recording another)


WHERE IS ?
All oscam files are in QboxHD /var/oscam directory

- file oscam.sh4 : executable (run with start_oscam shell script)
- file start_oscam : shell script to run OScam (you can change debug level editing it and change "DEBUG" var)
- file stop_all_cams : shell script to stop every active/running softcam
- dir conf/ : configuration files
- dir log/ : oscam logs
- dir docs/ : oscam documentation and examples


HOW TO RUN ?

Edit /var/oscam/conf/oscam.server and set your remote server (CCC or Newcamd or else .....)
Then run it using Softcam Panel

Archivos Adjuntos

qboxhd_update-oscam-1919.0-qboxhd.rar (264,7 KB (Kilobytes), 11 visitas)

Los 4 vu+

bosspapy

¿Cuando un servidor que ejecuta?

¿quizás ya existe?

elgeneral

Oscam QBox HD 2108.0

* 2108.0 17/04/2010
- added EMM support for Viacess and Videoguard (aka "***") (Nagra,Irdeto,Conax,Seca,Cryptoworks EMM implementation was ok)
- added full EMM management: added user 'dvbapi_qboxhd' in oscam.conf and oscam.user and set 'AU=1'. Be aware before changing these files or simple replacing with yours.
If you want to log EMM received, run oscam with DEBUG=64 (only EMM log) or DEBUG=72 (EMM + DVBAPI log) (you must edit start_oscam script)
If you use a remote card in a remote OSCam server and want to send it your EMM received, you MUST use Camd35 protocol for correct serial card negotiation between server and client. Other connection protocols (i.e. CCC or Newcamd) haven't this feature implemented yet.
- added 'saveinithistory' in oscam.conf (see docs/oscam.conf.txt)
- little changes in oscam.conf about log filenames
- disabled monitoring ('port=0' in oscam.conf, section [monitor]). If you need it, set 'port=988'
- note: if you need to connect two oscam (oscam QboxHD client and a remote oscam server) I suggest you to use CAMD35 protocol: simple setup (see example in oscam.conf), very fast (use UDP protocol instead of TCP: remember to setup correctly your router) e reliable.


Download

Los 4 vu+

elgeneral

**** CHANGELOG ****
> 2193.0 01/05/2010
- enabled QboxHD local card overclock (5.00 and 6.25 Mhz)
- many bug solved
- many cccam protocol improvement
- update conf/oscam.server file with overclock examples

oscam-2193.0-qboxhd_addon.tar.gz

oscam-2193.0-qboxhd_bin_nowebif.tar.gz

oscam-2193.0-qboxhd_bin_webif.tar.gz

oscam-2193.0-qboxhd_qboxhd_update.tar.gz

Los 4 vu+

elgeneral

16 May 2010

RELEASE 2288.0 QboxHD
(...omissis...)

**** CHANGELOG ****
> 2288.0 16/05/2010
- many cccam protocol improvement
- Radar 4.6 looks to have a bug and OSCam cannot work properly. Please use Radar 4.5 firmware

oscam-2288.0-qboxhd_addon.tar.gz

oscam-2288.0-qboxhd_bin_nowebif.tar.gz

oscam-2288.0-qboxhd_bin_webif.tar.gz

oscam-2288.0-qboxhd_qboxhd_update.tar.gz

Los 4 vu+

Maswell

oscam-0.99.4svn2324 QboxHD

operating system: QboxHD
-- system type: sh4-qboxhd-linux
-- system: linux
-- cpu: sh4
-- hw: qboxhd
-- use system aes functions
-- use built-in sha functions
-- use system pcsc functions
-- use system pthread functions
-- use system libusb functions
-- web interface enabled

Archivos Adjuntos

oscam-0.99.4svn2324_qboxhd_webif_pcsc.zip (294,6 KB (Kilobytes), 6 visitas)

comadreja

oscam-0.99.4svn2345 QboxHD

operating system: QboxHD
-- system type: sh4-qboxhd-linux
-- system: linux
-- cpu: sh4
-- hw: qboxhd
-- use system aes functions
-- use built-in sha functions
-- use system pcsc functions
-- use system pthread functions
-- use system libusb functions
-- web interface enabled

Archivos Adjuntos

	oscam-0.99.4svn2345_internal_pcsc_webif.zip (294,0 KB (Kilobytes), 2 visitas)
	oscam-0.99.4svn2345_internal_reader_webif.zip (292,4 KB (Kilobytes), 3 visitas)

elgeneral

30 May 2010

RELEASE 2345.0
********* BAD *********
- There is a bug in OSCam >2309 involving DVBAPI. OSCam MUST BE STARTED while watching an FTA channel. Wait solution from developers.
- OSCam QBoxHD CANNOT work with FD 01/03 and earlier : demux device ( /dev/dvb/adapter?/ ) miss "ca0" device and OSCam cannot work. OSCam QboxHD works fine with FD 19/03 and later

********* GOOD *********
- Works as simple client and server
- Enabled local card overclock for internal cardreader (only 5.00 Mhz and 6.25 Mhz), see TIPS&TRICKS
- Compiled with support for PCSC USB card reader (thanks to linch)

********* WHERE IS ? *********
OSCam files are in QboxHD /var/oscam directory

- file oscam-nowebif.sh4 : executable (run it with start_oscam shell script) compiled without WebIf
- file oscam-webif.sh4 : executable compiled with WebIf
- file oscam-nowebif-pcsc.sh4 : executable compiled without WebIf and with PCSC
- file oscam-webif-pcsc.sh4 : executable compiled with WebIf and with PCSC
- file start_oscam : shell script to run OSCam (you can change debug level, WebIf and PCSC)
- file stop_all_cams : shell script to stop every active/running softcam
- dir conf/ : configuration files
- dir log/ : oscam logs
- dir docs/ : oscam documentation and examples

********* CHANGELOG *********

> 2345.0 30/05/2010 - There is a bug in OSCam >2309 involving DVBAPI. OSCam MUST BE STARTED while watching an FTA channel. Wait solution from developers. I suggest you to zap to a FTA channel, then zap again to another FTA channel and now start OSCam
- (thanks to linch) now OSCam QboxHD include PCSC USB card reader support. Tested with a simple USB reader "OMNIKEY 1021" and it works fine.
OSCam now is compiled with:
pcsclite 1.6.0 http://pcsclite.alioth.debian.org/
ccid 1.3.12 drivers http://pcsclite.alioth.debian.org/ccid.html
libusb-0.1.12 legacy (needed by PCSC)
libusb-1.0.8 for future SmartReader support (until now it doesn't work due to problem in Linux ST kernel: it's old. SmartReader require kernel >=2.6.30)
Edit start_oscam and choose if you want (or not) WEBIF and PCSC support. If you enable PCSC, starting OSCam require about 20 seconds (it needs to start PCSC daemon too)
If you are not interested in these features, please don't enabled them: you save resources !
- If you have errors untarring oscam-2345.0-qboxhd_update.tar.gz (symlinks are not permitted in a FAT device like USB pendrive) don't worry: during update symlinks are automatically created for you

Download oscam-2345.0-qboxhd_addon.tar.gz

Download oscam-2345.0-qboxhd_update.tar.gz

Los 4 vu+

elgeneral

OSCam r2380 for qboxhd

OSCam r2380 looks to solve the 2345 DVBAPI bug (OSCam must be started while watching an FTA channel) and it looks to be faster during zapping.

I recompiled it and I attach here the 4 binaries and oscam.emu updated.
This is an update from version 2345.0 (last release), doesn't work if you have installed an older version.

- download tar.gz file
- copy it into QboxHD root dir /
- stop running OSCam (if any)
- extract archive file withcode:

Download oscam-2380-qboxhd-bin.tar

Los 4 vu+